Home > News > Details

HOW DO YOU MAKE SALTED MUSHROOMS

Jun 26, 2018

1.A, picking in order to guarantee the mushroom is not damaged, harvesting and processing to do three light, three points, three in time, the light, the light, light, hierarchical pick mushrooms, sizing processing, grading, timely pick mushrooms, timely delivery, timely processing. And in order to improve the quality of mushrooms, they should not spray water within 8 hours before harvesting.


2.Rinse the picked mushrooms in a VAT or sink to remove impurities. If the mushroom is unprocessed within 1.5 to 2 hours after harvesting, it should be rinsed with dilute salt water in time, and the concentration of salt water should not exceed 0.6%. The salt water concentration is too high, the mushroom surface becomes red after rinsing, and the mushroom will turn black after dechlorination treatment, which will affect the color of the mushroom body and reduce the quality of the mushroom.


3.The purpose is to kill the cells of mushroom body, inhibit the activity of peroxidase or proteolytic enzyme, and maintain the color of mushroom body. Remove any impurities by rinsing mushrooms. Remove and drain for 5 to 6 minutes. The amount of the pot should be appropriate, to mushroom energy in the pot turning and can all be submerged in water is appropriate. The pot when the heaven will flourish, ensure that the pot water temperature above 95 ℃, using bamboo sticks or stick fast flip, boil and remove bubbles, make filming for the mushroom body even, no different, different color. The killing time is determined by the size of the mushroom, generally 3.5 ~ 6 cm large mushroom, boil for 10 ~ 15 minutes, 1.8 ~ 2.5 cm small mushroom boil for 8 ~ 10 minutes, so that the mushroom body cooked.

Fresh Mushroom In Brine.jpg

4. Cool the mushrooms after killing them by pouring them into a clean water tank (basin or cement pool) for cooling. Best, tap water or running water cooling for cooling 20 ~ 30 minutes commonly, make the mushroom body cold, otherwise the mushroom body without cold curing, can cause the mushroom body rot, smell, and can shorten the storage period. Therefore, after the mushroom is killed, the mushroom body should be cooled to the heart of the mushroom, and then picked up and put in the sieve or basket for 5 to 10 minutes of bituminous water, and then added into the salt water to marinate.


5. The dried mushroom body will be fully cooled after decoloring, put into the cylinder or sink, and marinate for 3 to 5 days with 15% to 16% concentration of salt water, so that the color of the mushroom body will gradually turn yellow and white, that is, the fixed color. Preparation of monochrome brine: dissolve salt in boiling water, cool and filter, remove impurities, and then adjust to 15 to 16 percent (no more than 18 percent) concentration with baume. The concentration of brine is too high, because its osmosis is accelerated, can make mushroom body give water too much, appear black black, affect mushroom quality seriously.


6. Marinate and store the mushrooms after color setting. Drain for about 5 minutes, then add 20% ~ 23% salt water. Or adopt a salting method, that is, do not scoop out the cylinder, reserve fixed color brine, raise brine concentration directly, this method is both labor - saving and convenient.


7.The finished product of brine mushroom should have fragrance, light yellow color, no peculiar smell.